FixVault
Home › Lexus › 2009 › LS 600hL › Repair and Diagnosis › External Pages › Different car › Section 25 (Cruise Control) › Cruise Control System › DTC Check / Clear

DTC Check / Clear

WARNING: This page is about a different car, the 2008 Lexus LS 600hL. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC 
    1. Connect the Intelligent tester or Techstream to the DLC3.
    2. Turn the power switch ON (IG).
    3. Tune the tester on.
    4. Using the Intelligent tester or Techstream, enter the following menus:
      1. Intelligent tester - Select: DIAGNOSIS / OBD/ MOBD / CCS / DTC INFO.
      2. Techstream - Select: Powertrain / Cruise Control / Trouble Codes.
    5. Read the DTCs.
  2. CLEAR DTC 
    1. Connect the Intelligent tester or Techstream to the DLC3.
    2. Turn the power switch ON (IG).
    3. Turn the tester on.
    4. Using the Intelligent tester or Techstream, enter the following menus:
      1. Intelligent tester - Select: DIAGNOSIS / OBD/ MOBD / CCS / DTC INFO.
      2. Techstream - Select: Powertrain / Cruise Control / Trouble Codes.
    5. Erase the DTCs
About FixVault