Combination Meter: Reassembly

WARNING: This page is about a different car, the 2008 Lexus LS 600hL. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL METER DISPLAY PANEL
1. Temporarily install the meter ECU
2. Connect each flat cable
  
  Fig 1: Installing Display Panel
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Attach the 6 claws to install the locks.
  
  Fig 2: Attaching The 6 Claws To Install Locks
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Install the meter cover with the 12 screws.
  
  Fig 3: Identifying Combination Meter Cover Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL COMBINATION METER GLASS
1. Attach the 6 claws to install the meter glass.
2. Install the 2 screws.
Fig 4: Identifying Combination Meter Glass Claws And Screws
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 1 COMBINATION METER BRACKET
1. Install the bracket with the 4 screws.
Fig 5: Identifying No. 1 Combination Meter Bracket Screws
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002