FixVault
Home › Lexus › 2009 › LS 600hL › Repair and Diagnosis › External Pages › Different car › Section 29 (Interior) › Rear Sunshade System › Customize Parameters

Customize Parameters

WARNING: This page is about a different car, the 2008 Lexus LS 600hL. However, it is still accessible from the selected car via links, so may be relevant.
  1. CUSTOMIZING FUNCTION WITH Intelligent tester OR TECHSTREAM (REFERENCE) 
    NOTE:
    • When the customer requests a change in a function, first make sure that the function can be customized.
    • Be sure to make a note of the current settings before customizing.
    • When troubleshooting a function, first make sure that the function is set to the default setting.
    1. Connect the Intelligent tester or Techstream to the DLC3.
    2. Turn the power switch ON (IG)
    3. Turn the tester on
    4. Enter the following menus
      1. Intelligent tester - Select CUSTOMIZE /
      2. Techstream - Select Customize Setting /
    5. Select the setting by referring to the table below.
      1. Intelligent tester

        OTHERS 

        SYSTEM SETTING REFERENCE

        System Default Contents Setting
        R-SHADE DELAY T 07s Function to adjust reverse-linked sunshade lowering function's response time 07S/1 2s/09s/00s
        R-SHADE REVERSE AVAIL Reverse linked function AVAIL or NOT AVL
      2. Techstream

    Others 

    SYSTEM SETTING REFERENCE

    System Default Contents Setting
    Rear Shade Delay Time 07s Function to adjust reverse-linked sunshade lowering function's response time 07s/12s/09s/00s
    R-pos to Rear Sun Shade COM ON Reverse linked function ON or OFF
About FixVault