Roof Headlining: Disassembly

WARNING: This page is about a different car, the 2008 Lexus LS 600hL. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE ROOF SILENCER PAD
1. for Standard Type
  Remove the roof silencer pad
  1. Remove the 5 roof silencer pads
  Fig 1: Identifying Roof Silencer Pad - For Standard Type
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. for Standard Type, w/ Rear Cooler.
  Remove the roof silencer pad
  1. Remove the 5 roof silencer pads
  Fig 2: Identifying Roof Silencer Pad - Standard Type, W/ Rear Cooler
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. w/ Sliding Roof
  Remove the roof silencer pad.
  1. Remove the 5 roof silencer pads
  Fig 3: Identifying Roof Silencer Pad - W/ Sliding Roof
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. w/ Sliding Roof, w/ Rear Cooler
  Remove the roof silencer pad
  1. Remove the 5 roof silencer pads
  Fig 4: Identifying Roof Silencer Pad - W/ Sliding Roof, W/ Rear Cooler
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. w/ Rear Seat Entertainment System Remove the roof silencer pad
  1. Remove the 6 roof silencer pads
Fig 5: Identifying Roof Silencer Pad - w/ Rear Seat Entertainment System
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE NO. 1 ROOF WIRE
1. Detach the 2 claws and separate the bulb holder from the vanity light
  HINT:
  
  Use the same procedures to remove the light on the other side
2. Remove the double-sided tape and roof wire
Fig 6: Identifying No. 1 Roof Wire And Claws
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002