FixVault
Home › Lexus › 2009 › LS 600hL › Repair and Diagnosis › External Pages › Different car › Section 35 (Lighting) › License Plate Light Assembly › Installation

License Plate Light Assembly: Installation

WARNING: This page is about a different car, the 2008 Lexus LS 600hL. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL LICENSE PLATE LIGHT ASSEMBLY 
    1. Install the license plate light with the 2 screws.
  2. INSTALL BACK DOOR OPENER SWITCH  (See INSTALLATION )
  3. INSTALL BACK DOOR GARNISH RETAINER  (See INSTALLATION )
  4. INSTALL LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH  (See INSTALLATION )
    Fig 1: Identifying License Plate Light Screws
    G05782892Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. INSTALL REAR LIGHT ASSEMBLY RH 
    1. Install the rear light with the 4 nuts.
    2. Connect the connector.
  6. INSTALL REAR LIGHT ASSEMBLY LH  (See INSTALLATION  )
  7. INSTALL TELEVISION CAMERA ASSEMBLY (w/ Rear View Monitor System)  (See INSTALLATION )
  8. INSTALL BACK DOOR TRIM COVER  (See INSTALLATION )
  9. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY  (See REASSEMBLY  )
  10. INSTALL SWITCH BEZEL (w/ Power Trunk Lid System)  (See INSTALLATION )
  11. INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP  (See INSTALLATION )
  12. INSTALL REAR COMBINATION LIGHT SERVICE COVER RH  (See INSTALLATION )
  13. INSTALL REAR COMBINATION LIGHT SERVICE COVER LH  (See INSTALLATION )
  14. INSTALL LUGGAGE COMPARTMENT DOOR COVER RH  (See INSTALLATION )
  15. INSTALL LUGGAGE COMPARTMENT DOOR COVER LH  (See INSTALLATION )
About FixVault