Map Light Assembly: Installation

WARNING: This page is about a different car, the 2008 Lexus LS 600hL. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL MAP LIGHT ASSEMBLY
1. Connect the connectors.
2. Attach the 2 clips to install the map light.
  
  Fig 1: Identifying Map Light Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Install the 2 screws.
  
  Fig 2: Locating Map Light Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Attach the 2 claws and close the 2 covers.
  
  Fig 3: Identifying Map Light Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002