Inspection Procedure
WARNING: This page is about a different car, the 2008 Lexus LS 600hL. However, it is still accessible from the selected car via links, so may be relevant.
- REPLACE OBJECT RECOGNITION CAMERA
- Replace the object recognition camera (see ADJUSTMENT )
- ADJUST OBJECT RECOGNITION CAMERA
- Adjust the object recognition camera (see ADJUSTMENT )
- CHECK FOR DTC
- Using the Intelligent tester or Techstream, enter the following menus'
- Intelligent tester - Select: DIAGNOSIS / OBD/MOBD / PRE-COLLISION 2 / DTC INFO.
- Techstream - Select: Body Electrical / Pre-Collision 2 / Trouble Code
- Select "CLEAR" and clear the data.
- Recheck for DTC.
OK: DTC C1A21 is not output.
NG: REPLACE DRIVING SUPPORT ECU (See REMOVAL )
OK: END
- Using the Intelligent tester or Techstream, enter the following menus'