Driver Monitor Camera: Removal

WARNING: This page is about a different car, the 2008 Lexus LS 600hL. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE STEERING COLUMN COVER
1. Remove the 3 screws.
2. Detach the 2 claws and remove the cover.
  
  Fig 1: Locating Steering Column Cover Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Disconnect the connector.
4. Detach the claw and 4 clips and remove the cover.
Fig 2: Identifying Steering Column Cover Claw And Clips
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE DRIVER MONITOR BRACKET
1. Remove the screw.
2. Detach the claw and remove the bracket.
Fig 3: Locating Driver Monitor Bracket Screw
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE DRIVER MONITOR CAMERA
1. Remove the 3 screws.
  
  Fig 4: Identifying Driver Monitor Camera Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Detach the 2 claws and remove the camera in the direction indicated by the arrow.
Fig 5: Removing Driver Monitor Camera
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002