FixVault
Home › Lexus › 2009 › LS 600hL › Repair and Diagnosis › External Pages › Different car › Section 43 (Pre-Collision) › Driver Monitor Ecu › Installation

Driver Monitor Ecu: Installation

WARNING: This page is about a different car, the 2008 Lexus LS 600hL. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL DRIVER MONITOR ECU 
    1. Install the ECU with the 2 nuts.
      Fig 1: Identifying Driver Monitor ECU Nuts
      G05775773Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the ECU with the 2 nuts
    3. Connect the connectors
  2. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY  (See INSTALLATION )
  3. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY  (See INSTALLATION )
    Fig 2: Locating Driver Monitor ECU Connectors And Nuts
    G04950920Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY  (See INSTALLATION )
  5. INSTALL NO. 1 INSTRUMENT CLUSTER MOULDING  (See INSTALLATION )
  6. INSTALL INSTRUMENT SIDE PANEL LH  (See INSTALLATION )
  7. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY  (See INSTALLATION )
  8. INSTALL INSTRUMENT PANEL FINISH PANEL END LH  (See INSTALLATION )
About FixVault