FixVault
Home › Lexus › 2009 › LS 600hL › Repair and Diagnosis › External Pages › Different car › Section 43 (Pre-Collision) › Pre-Collision Brake Cancel Switch › Installation

Pre-Collision Brake Cancel Switch: Installation

WARNING: This page is about a different car, the 2008 Lexus LS 600hL. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL PRE-COLLISION BRAKE CANCEL SWITCH ASSEMBLY 
    1. Attach the 2 claws to install the switch
  2. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY  (See INSTALLATION )
    Fig 1: Identifying Pre-Collision Brake Cancel Switch Assembly Claws
    G04950915Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault