FixVault
Home › Lexus › 2009 › LS 600hL › Repair and Diagnosis › External Pages › Different car › Section 45 (Navigation) › Navigation Antenna › Installation

Navigation Antenna: Installation

WARNING: This page is about a different car, the 2008 Lexus LS 600hL. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL NAVIGATION ANTENNA ASSEMBLY (for HDD) 
    1. Install the antenna with the 2 screws.
    2. Attach the 2 clamps.
      Fig 1: Locating Antenna Screws (HDD)
      G05784419Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL NAVIGATION ANTENNA ASSEMBLY (for DVD) 
    Fig 2: Locating Antenna Screws (DVD)
    G05784418Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Install the antenna with the 2 screws.
    2. Attach the 4 clamps.
  3. INSTALL NO. 3 HEATER TO REGISTER DUCT  (See REASSEMBLY )
  4. INSTALL DEFROSTER NOZZLE ASSEMBLY  (See INSTALLATION )
  5. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT  (See REASSEMBLY )
  6. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY 
    1. Install the instrument panel safety pad (See INSTALLATION ).
  7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    NOTE: When disconnecting the cable some systems need to be initialized after the cable is reconnected (see INITIALIZATION ).
  8. INSTALL BATTERY SERVICE HOLE COVER LH  (See INSTALLATION )
  9. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY  (See INSTALLATION )
  10. INSPECT STEERING PAD  (See REMOVAL )
  11. CHECK SRS WARNING LIGHT 
    1. Check the SRS warning light (see DIAGNOSIS SYSTEM )
About FixVault