FixVault
Home › Lexus › 2009 › LS 600hL › Repair and Diagnosis › External Pages › Different car › Section 6 (Exterior) › Rocker Panel Moulding › Disassembly

Rocker Panel Moulding: Disassembly

WARNING: This page is about a different car, the 2008 Lexus LS 600hL. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE ROCKER PANEL MOULDING CLIP 
    1. Remove the 11 rocker panel moulding clips.
    Fig 1: Locating Rocker Panel Moulding Clips
    G05786749Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE NO. 1 ROCKER PANEL MOULDING PROTECTOR 
    1. Remove the 4 No. 1 rocker panel moulding protectors
    Fig 2: Identifying No. 1 Rocker Panel Moulding Protectors
    G05786750Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE NO. 2 ROCKER PANEL MOULDING PROTECTOR 
    1. Remove the No. 2 rocker panel moulding protector
    Fig 3: Identifying No. 2 Rocker Panel Moulding Protectors
    G05786751Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE NO. 3 ROCKER PANEL MOULDING PROTECTOR 
    1. Remove the 2 No. 3 rocker panel moulding protectors
    Fig 4: Identifying No. 3 Rocker Panel Moulding Protectors
    G05786752Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE NO. 4 ROCKER PANEL MOULDING PROTECTOR 
    1. Remove the 4 No. 4 rocker panel moulding protectors
    Fig 5: Identifying No. 4 Rocker Panel Moulding Protectors
    G05786753Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault