FixVault
Home › Lexus › 2009 › LS 600hL › Repair and Diagnosis › External Pages › Different car › Section 6 (Exterior) › Rocker Panel Moulding › Reassembly

Rocker Panel Moulding: Reassembly

WARNING: This page is about a different car, the 2008 Lexus LS 600hL. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL NO. 4 ROCKER PANEL MOULDING PROTECTOR 
    1. Install 4 new No. 4 protectors
    Fig 1: Identifying No. 4 Protectors
    G05786753Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL NO. 3 ROCKER PANEL MOULDING PROTECTOR 
    1. Install 2 new No. 3 protectors.
    Fig 2: Identifying No. 3 Protectors
    G05786752Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL NO. 2 ROCKER PANEL MOULDING PROTECTOR 
    1. Install a new No. 2 protector
    Fig 3: Identifying No. 2 Protectors
    G05786751Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSTALL NO. 1 ROCKER PANEL MOULDING PROTECTOR 
    1. Install 4 new protectors to the areas shown in the illustration
    Fig 4: Identifying No. 1 Rocker Panel Moulding Protector
    G05786757Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. INSTALL ROCKER PANEL MOULDING CLIP 
    1. Install the 11 rocker panel moulding clips
    Fig 5: Locating Rocker Panel Moulding Clips Location
    G05786749Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault