FixVault
Home › Lexus › 2009 › SC 430 › Repair and Diagnosis (Single Page) › Engine Performance › Fuel Delivery › Fuel (Service Information) › Fuel Pump › Disassembly › Disassembly

Fuel Pump: Disassembly: Disassembly

  1. REMOVE NO. 2 FUEL SUCTION SUPPORT 
    Fig 1: Removing No. 2 Fuel Suction Support
    GTY135712Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Using 2 screwdrivers, disconnect the 3 snap claws from the claw holes and remove the fuel suction support.
      NOTE:

      Be careful not to damage the suction support and fuel filter.

    2. Remove the fuel pump cushion rubber.
  2. REMOVE FUEL PRESSURE WITH JET PUMP REGULATOR ASSEMBLY 
    Fig 2: Removing Fuel Pressure With Jet Pump Regulator Assembly
    GTY145098Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the fuel return jet tube from the clamp of the fuel filter.
    2. Pull out the fuel pressure regulator and fuel return jet tube.
    3. Remove the O-ring from the fuel pressure regulator.
  3. REMOVE FUEL SUCTION PLATE WITH SENDER GAUGE 
    Fig 3: Disconnecting Snap Claws & Removing Fuel Filter
    GTY144706Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Using 2 screwdrivers, disconnect the 4 snap claws from the claw holes and remove the fuel filter.
      NOTE:

      Be careful not to damage the filter assembly and suction plate.

    2. Disconnect the fuel pump connector.
    3. Remove the O-ring from the fuel port of the fuel suction plate.
  4. REMOVE FUEL PUMP FILTER 
    1. Remove the clip and filter.
  5. REMOVE FUEL PUMP ASSEMBLY 
    1. Pull out the fuel pump.
    2. Remove the seal and spacer from the fuel pump.
About FixVault