FixVault
Home › Lexus › 2009 › SC 430 › Repair and Diagnosis › Engine Performance › Remove, Overhaul & Install › Engine Control System (Service Information) › Mass Air Flow Meter › Removal › Removal

Mass Air Flow Meter: Removal: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    WARNING:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

  2. REMOVE MASS AIR FLOW METER 
      Fig 1: Locating Mass Air Flow Meter With Screws
      GTY127847Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the air flow meter connector.
    2. Remove the 2 screws and mass air flow meter.
    3. Remove O-ring from the mass air flow meter.
About FixVault