Data List / Active Test

HINT: 

Performing Techstream Active Test allows relay, VSV, actuator, and other items to be operated without removing any parts. Performing the Active Test early in troubleshooting is one way to save time. The Data List can be displayed during the Active Test.

1. Connect Techstream to the DLC3.
2. Turn the ignition switch ON.
3. Perform the Active Test according to the tester's display.
   ABS/VSC/TRAC
   
   

   Tester Display	Test Part	Control Range	Diagnostic Note
   PPS solenoid	Power steering solenoid valve ON / OFF	ON / OFF	-