FixVault
Home › Lexus › 2010 › ES 350 › Repair and Diagnosis › External Pages › Different car › Section 80 (Lighting) › Headlight Assembly › Removal

Headlight Assembly: Removal

WARNING: This page is about a different car, the 2007 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (for HID Headlight) 
  2. REMOVE COOL AIR INTAKE DUCT SEAL  (See REMOVAL )
  3. REMOVE FRONT BUMPER ASSEMBLY  (See DISASSEMBLY )
  4. REMOVE HOOD HINGE COVER  (See REMOVAL )
  5. REMOVE ENGINE ROOM SIDE COVER  (See REMOVAL )
  6. REMOVE HOOD TO FRONT FENDER SEAL 
  7. REMOVE HEADLIGHT ASSEMBLY 
    1. Remove the 3 bolts and screw.
    2. Disconnect the connectors and remove the headlight assembly.
      Fig 1: Identifying Headlight Assembly Bolts And Screw
      G05252375Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault