FixVault
Home › Lexus › 2010 › ES 350 › Repair and Diagnosis › External Pages › Different car › Section 80 (Lighting) › License Plate Light Assembly › Removal

License Plate Light Assembly: Removal

WARNING: This page is about a different car, the 2007 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE LUGGAGE COMPARTMENT DOOR ASSIST GRIP  (See REMOVAL )
  2. REMOVE LUGGAGE LOCK CONTROL CABLE PLATE  (See REMOVAL )
  3. REMOVE LUGGAGE COMPARTMENT DOOR INSIDE HANDLE  (See REMOVAL )
  4. REMOVE LUGGAGE COMPARTMENT DOOR COVER  (See REMOVAL )
  5. REMOVE REAR LIGHT ASSEMBLY LH (See  REMOVAL   ) 
  6. REMOVE REAR LIGHT ASSEMBLY RH 

    HINT:

    Use the same procedures for the RH side and the LH side.

  7. REMOVE LUGGAGE DOOR OPENING SWITCH ASSEMBLY  (See INSPECTION )
  8. REMOVE LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY  (See REMOVAL )
  9. REMOVE TELEVISION CAMERA ASSEMBLY (w/ Rear View Monitor System)  (See REMOVAL )
  10. REMOVE LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY (w/ Rear View Monitor System)  (See REMOVAL )
  11. REMOVE LICENSE PLATE LIGHT ASSEMBLY 
    1. Disconnect the connector.
    2. Disengage the 2 claws and remove the license plate light assembly as shown in the illustration.
      Fig 1: Removing License Plate Light Assembly
      G05252454Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault