FixVault
Home › Lexus › 2010 › ES 350 › Repair and Diagnosis › External Pages › Different car › Section 80 (Lighting) › Turn Signal Flasher Assembly › Removal

Turn Signal Flasher Assembly: Removal

WARNING: This page is about a different car, the 2007 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FRONT DOOR SCUFF PLATE LH  (See REMOVAL )
  2. REMOVE FRONT DOOR OPENING TRIM COVER LH  (See REMOVAL )
  3. REMOVE SIDE INSTRUMENT PANEL LH  (See REMOVAL )
  4. REMOVE INSTRUMENT PANEL FINISH PANEL END LH  (See REMOVAL )
  5. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY  (See REMOVAL )
  6. REMOVE NO. 1 SWITCH HOLE BASE  (See REMOVAL )
  7. REMOVE TURN SIGNAL FLASHER ASSEMBLY 
    1. Disconnect the connector.
    2. Remove the clamp and the turn signal flasher assembly.
      Fig 1: Locating Turn Signal Flasher Assembly Clamp
      G05252554Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault