Front Center Speaker: Removal

WARNING: This page is about a different car, the 2007 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE NO. 1 SPEAKER HOLE COVER
1. Apply protective tape to the area shown in the illustration.
  
  Fig 1: Identifying Applying Protective Tape Area
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Using a molding remover, disengage the 4 clips and remove the No. 1 speaker hole cover.
  
  Fig 2: Disengaging No. 1 Speaker Hole Cover Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT STEREO COMPONENT SPEAKER ASSEMBLY
1. Remove the 2 bolts.
2. Lift the front stereo component speaker assembly and disconnect the connector to remove the stereo component speaker assembly.
  NOTE: Do not touch the cone part of the speaker.
  
  Fig 3: Locating Front Stereo Component Speaker Assembly Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002