Cruise Control Main Switch: Installation: Installation
WARNING: This page is about a different car, the 2009 Lexus IS 350 and 2009 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL CRUISE CONTROL MAIN SWITCH
- Install the cruise control main switch with the 2 screws.
Torque: 1.7 to 3.0 N*m (17 to 31 kgf*cm, 15 to 27 in.*lbf)
- Connect the connector.
- Install the cruise control main switch with the 2 screws.
- INSTALL STEERING PAD . Refer to INSTALLATION - Step 1
- INSTALL NO. 3 LOWER STEERING WHEEL COVER
- INSTALL NO. 2 LOWER STEERING WHEEL COVER
- CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
- INSPECT SRS WARNING LIGHT
Refer to DIAGNOSIS SYSTEM