Back-Up Light Switch: Installation: Installation

INSTALL BACK-UP LIGHT SWITCH ASSEMBLY
1. Using SST, install the back-up light switch with a new gasket to the manual transmission.
  
  Fig 1: Identifying Back-Up Light Switch Gasket
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  - SST: 09922-10010
  with SST
  
  Torque: 25 N*m (258 kgf*cm, 19 ft.*lbf)
  
  without SST
  
  Torque: 44 N*m (450 kgf*cm, 32 ft.*lbf)
  NOTE:
  - The "with SST" torque value is effective when using SST with a fulcrum length of 133 mm (5.24 in.).
  - The "with SST" torque value is effective when using a torque wrench with a fulcrum length of 180 mm (7.09 in.).
  - The "with SST" torque value is effective when SST is parallel to the torque wrench.
2. Connect the 3 clamps.
  
  Fig 2: Identifying Back-Up Light Switch Clamps
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Connect the back-up light switch connector.
  
  Fig 3: Identifying Back-Up Light Swtich Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002