Starting (Service Information): Starter: Installation: Installation

INSTALL STARTER ASSEMBLY
1. Install the starter with the 2 bolts.
  
  Fig 1: Identifying Starter With Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 58 N*m (591 kgf*cm, 43 ft.*lbf)
2. Connect the wire harness to terminal 30 and install the nut, and then attach the terminal cap.
  Torque: 9.8 N*m (100 kgf*cm, 87 in.*lbf)
3. Connect the terminal 50 connector to the starter assembly.
INSTALL EXHAUST MANIFOLD SUB-ASSEMBLY LH
HINT:

Refer to INSTALLATION .
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
INSPECT FOR EXHAUST GAS LEAK