FixVault
Home › Lexus › 2010 › IS F › Repair and Diagnosis › Body & Frame › Seats › Seat (Service Information) › Lumbar Switch › Installation › Installation

Lumbar Switch: Installation: Installation

  1. INSTALL LUMBAR SWITCH 
    1. Install the lumbar switch with the 2 screws.
      Fig 1: Identifying Screws And Front Power Seat Lumbar Switch
      GTY125253Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL FRONT SEAT CUSHION SHIELD ASSEMBLY  See step  27
  3. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB  See step  28
  4. INSTALL RECLINING POWER SEAT SWITCH KNOB  See step  29
  5. INSTALL FRONT SEAT ASSEMBLY  See step  1
  6. INSTALL REAR INNER SEAT TRACK BRACKET COVER  See step  2
  7. INSTALL REAR OUTER SEAT TRACK BRACKET COVER  See step  3
  8. INSTALL FRONT INNER SEAT TRACK BRACKET COVER  See step  4
  9. INSTALL FRONT OUTER SEAT TRACK BRACKET COVER  See step  5
  10. INSTALL FRONT SEAT HEADREST ASSEMBLY 
  11. INSPECT SRS WARNING LIGHT 

    HINT: 

    Inspect the SRS warning light. Refer to DIAGNOSIS SYSTEM .

  12. INSPECT FRONT SEAT ASSEMBLY  See step  10
About FixVault