Accelerator Pedal: Removal: Removal

REMOVE COWL TOP VENTILATOR LOUVER RH . Refer to REMOVAL - Step 1
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
WARNING:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

NOTE:
After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.
REMOVE ACCELERATOR PEDAL

Fig 1: Locating Accelerator Pedal Nuts
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Disconnect the accelerator pedal sensor connector.
2. Remove the 3 nuts and accelerator pedal.
  NOTE:
  - Avoid physical shocks to the accelerator pedal.
  - Do not disassemble the accelerator pedal assembly.