Millimeter Wave Radar Sensor: Installation: Installation
WARNING: This page is about a different car, the 2010 Lexus GS 450h. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY
- Tighten the 3 bolts on the millimeter wave radar sensor assembly.
Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf)
HINT:
Tighten the bolts in the order indicated in the illustration.
- Connect the connector.
- Tighten the 3 bolts on the millimeter wave radar sensor assembly.
- ADJUST MILLIMETER WAVE RADAR SENSOR ASSEMBLY See step 1
- INSTALL FRONT BUMPER ASSEMBLY . Refer to INSTALLATION - Step 8
- INSTALL COOL AIR INTAKE DUCT SEAL . Refer to INSTALLATION - Step 9