FixVault
Home › Lexus › 2010 › LS 600hL › Repair and Diagnosis › Engine Performance › Fuel Delivery › Fuel (Service Information) › Fuel Pump › Installation › Installation

Fuel Pump: Installation: Installation

  1. INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY  See step  17
  2. INSTALL FUEL TANK VENT TUBE SET PLATE  See step  18
  3. INSTALL REAR FLOOR NO. 2 SERVICE HOLE COVER  See step  19
  4. INSTALL REAR NO. 2 SEAT ADJUSTER ASSEMBLY (for Power Seat)  See step  22
  5. INSTALL REAR NO. 2 SEAT ADJUSTER ASSEMBLY (for Ottoman)  See step  23
  6. INSTALL REAR SEAT CUSHION ASSEMBLY (for Fixed Seat Type)  . Refer to INSTALLATION - Step 2
  7. INSTALL SERVICE PLUG GRIP 
    1. Install the service plug grip. Refer to INSTALLATION .
  8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Refer to INITIALIZATION .

  9. INSTALL BATTERY SERVICE HOLE COVER LH  . Refer to INSTALLATION - Step 15
  10. INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire)  . Refer to INSTALLATION - Step 16
  11. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY  . Refer to INSTALLATION - Step 17
  12. INSPECT FOR FUEL LEAK  . Refer to ON-VEHICLE INSPECTION - Step 1
About FixVault