FixVault
Home › Lexus › 2011 › CT 200h › Repair and Diagnosis › Accessories & Equipment › Infotainment › Navigation System (Service Information) › Navigation Receiver › Installation › Installation

Navigation Receiver: Installation: Installation

  1. INSTALL NAVIGATION COMPUTER SUB-ASSEMBLY (w/ Navigation System for HDD) 
  2. INSTALL DISPLAY AND NAVIGATION MODULE DISPLAY (w/ Navigation System for DVD) 
  3. INSTALL DISC PLAYER BRACKET 
    1. Install the disc player bracket with the 3 bolts.
  4. INSTALL NO. 2 DISC PLAYER BRACKET 
    1. Install the No. 2 disc player bracket with the 3 bolts.
  5. INSTALL HARD DISK DRIVE (w/ Navigation System for HDD)  See step  1
  6. INSTALL DISPLAY AND NAVIGATION MODULE DISPLAY ASSEMBLY WITH BRACKET 
    1. Connect each connector and install the display and navigation module display assembly with bracket.
    2. Install the 4 bolts.
  7. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET  . Refer to INSTALLATION - Step 5
  8. INSTALL AIR CONDITIONING CONTROL ASSEMBLY  . Refer to INSTALLATION - Step 3
  9. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY  . Refer to INSTALLATION - Step 14
  10. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY  . Refer to INSTALLATION - Step 19
  11. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH  . Refer to INSTALLATION - Step 20
  12. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH  . Refer to INSTALLATION - Step 21
  13. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL  . Refer to INSTALLATION - Step 7
  14. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY  . Refer to INSTALLATION - Step 15
  15. INSTALL NO. 3 INSTRUMENT CLUSTER FINISH PANEL GARNISH (for Metal Finish Panel and Urethane Panel)  . Refer to INSTALLATION - Step 19
  16. INSTALL NO. 3 INSTRUMENT CLUSTER FINISH PANEL GARNISH (for Wood Panel and Bamboo Panel)  . Refer to INSTALLATION - Step 20
  17. INSTALL INSTRUMENT SIDE PANEL RH  . Refer to INSTALLATION - Step 27
  18. CONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP RH  . Refer to INSTALLATION - Step 52
  19. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 

    HINT: 

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Refer to INITIALIZATION .

  20. INSTALL REAR FLOOR BOARD UPPER NO. 3 PLATE  . Refer to INSTALLATION - Step 70
  21. INSTALL DECK FLOOR BOX RH  . Refer to INSTALLATION - Step 71
  22. INSTALL REAR NO. 3 FLOOR BOARD  . Refer to INSTALLATION - Step 72
  23. INSTALL REAR DECK FLOOR BOX  . Refer to INSTALLATION - Step 73
  24. INSTALL REAR NO. 2 FLOOR BOARD  . Refer to INSTALLATION - Step 74
  25. ADJUST CLOCK 
About FixVault