FixVault
Home › Lexus › 2011 › CT 200h › Repair and Diagnosis › Engine Mechanical › Auxiliary Emission Control Systems › Emission Control System (Service Information) › Vacuum Sensor › Installation › Installation

Vacuum Sensor: Installation: Installation

  1. INSTALL MANIFOLD ABSOLUTE PRESSURE SENSOR 
    1. Install the manifold absolute pressure sensor with the bolt.

      Torque: 7.0 N*m (71 kgf*cm, 62 in.*lbf) 

    2. Connect the connector.
  2. INSTALL AIR CLEANER CASE  . Refer to INSTALLATION - Step 3
  3. INSTALL INLET AIR CLEANER ASSEMBLY  . Refer to INSTALLATION - Step 4
  4. INSTALL AIR CLEANER CAP SUB-ASSEMBLY  . Refer to INSTALLATION - Step 5
  5. INSTALL NO. 2 CYLINDER HEAD COVER  . Refer to INSTALLATION - Step 98
About FixVault