FixVault
Home › Lexus › 2011 › CT 200h › Repair and Diagnosis › Hybrid/Electric Powertrain › Electric Converters and Controllers › Hybrid Control System (Service Information) › Hybrid Control System › DTC P0AFC-150: Hybrid Battery Pack Sensor Module › Procedure

DTC P0AFC-150: Hybrid Battery Pack Sensor Module: Procedure

  1. CHECK HARNESS AND CONNECTOR (IGCT VOLTAGE). Refer to  PROCEDURE - Step 1 

    NG → See step   2 

    OK → See step   3 

  2. CHECK HARNESS AND CONNECTOR (GND - BODY GROUND). Refer to  PROCEDURE - Step 2 

    NG → REPAIR OR REPLACE HARNESS OR CONNECTOR 

    OK → REPAIR OR REPLACE HARNESS OR CONNECTOR (IGCT NO. 2 FUSE - BATTERY SMART UNIT) 

  3. REPLACE BATTERY SMART UNIT. Refer to  COMPONENTS 
About FixVault