Transfer Valve Body Assembly: Installation: Installation

INSTALL TRANSFER CONTROL SOLENOID See step 4
INSTALL TRANSFER VALVE BODY ASSEMBLY
1. Connect the transfer wire connector to the transfer control solenoid.
  
  Fig 1: Identifying Transfer Valve Body Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the transfer upper valve body with the 4 bolts.
  Torque: 9.8 N*m (100 kgf*cm, 87 in.*lbf)
INSTALL TRANSFER OIL PAN See step 2
INSTALL TRANSFER DYNAMIC DAMPER See step 3
INSTALL ENGINE REAR MOUNTING MEMBER See step 4
INSTALL FRONT EXHAUST PIPE ASSEMBLY
Refer to INSTALLATION
ADD AUTOMATIC TRANSMISSION FLUID . Refer to INSTALLATION - Step 24
INSPECT FOR EXHAUST GAS LEAK