FixVault
Home › Lexus › 2011 › GS 350 RWD › Repair and Diagnosis › Suspension › Suspension Control Systems › Suspension Control System (Service Information) › Front Acceleration Sensor › Removal › Removal

Front Acceleration Sensor: Removal: Removal

NOTE:
  • Do not drop the acceleration sensor. If it is dropped, replace it with a new one.
  • The acceleration sensor removed from the vehicle must not be placed upside down.
  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    WARNING:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

  2. REMOVE FRONT DOOR SCUFF PLATE LH  . Refer to REMOVAL - Step 9
  3. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY  . Refer to REMOVAL - Step 28
  4. REMOVE FRONT DOOR OPENING TRIM COVER LH  . Refer to REMOVAL - Step 11
  5. REMOVE FRONT ACCELERATION SENSOR ASSEMBLY 
    Fig 1: Identifying Acceleration Sensor Assembly
    GTY106572Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the sensor connector.
    2. Remove the nut and acceleration sensor.
  6. REMOVE FRONT ACCELERATION SENSOR 
    Fig 2: Identifying Acceleration Sensor
    GTY106573Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Remove the nut and sensor from the bracket.
About FixVault