Rear Speed Sensor: Installation: Installation

WARNING: This page is about a different car, the 2010 Lexus GS 460 and 2010 Lexus GS 350. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL SPEED SENSOR REAR LH
1. Install the speed sensor rear with the bolt.
  
  Fig 1: Identifying Bolt Of Speed Sensor Rear LH
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 8.5 N*m (87 kgf*cm, 75 in.*lbf)
  
  NOTE:
  Prevent foreign matter from attaching to the sensor tip.
2. Connect the speed sensor connector.
INSTALL REAR WHEEL
1. Install the rear wheel.
  Torque: 103 N*m (1,050 kgf*cm, 76 ft.*lbf)
INSPECT SPEED SENSOR SIGNAL
for 2GR-FSE. Refer to TEST MODE PROCEDURE

for 1UR-FSE. Refer to TEST MODE PROCEDURE