Height Control Sensor: Installation: Installation

1. Install the height control sensor with the 2 bolts.
   Fig 1: Identifying Matchmarks On Link And Bracket

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Torque: 13 N*m (133 kgf*cm, 10 ft.*lbf) 

   TEXT IN ILLUSTRATION
   
   

   *1

   Matchmark

   NOTE:

   Replace the rear height control sensor sub-assembly with a new one if it is dropped.

2. Align the matchmarks on the link and bracket.
3. Connect the sensor link with the nut.

   Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

4. Connect the connector, and then attach the connector.
   NOTE:

   Securely connect the connector.

5. Attach the clamp.

HINT: 

Use the same procedure described for the LH side.