Stop Light Switch: Inspection: Inspection
WARNING: This page is about a different car, the 2011 Lexus IS 350 and 2011 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT STOP LIGHT SWITCH ASSEMBLY
- Remove the switch.
- Measure the resistance according to the value(s) in the table below.
Standard resistance
Tester Connection Switch Condition Specified Condition 1 - 2 Pushed 10 kΩ or higher 1 - 2 Not pushed Below 1 Ω 3 - 4 Pushed Below 1 Ω 3 - 4 Not pushed 10 kΩ or higher If the result is not as specified, replace the switch assembly.