VSC Off Switch: Inspection: Inspection

WARNING: This page is about a different car, the 2011 Lexus IS 350 and 2011 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.

INSPECT VSC OFF SWITCH

Disconnect the VSC OFF switch connector.

Measure the resistance according to the value(s) in the table below.

Fig 1: Identifying VSC OFF Switch Connector Terminals

Standard resistance

Tester Connection	Switch Condition	Specified Condition
3 (+) - 4 (E)	Switch is pushed in	Below 1 Ω
3 (+) - 4 (E)	Switch is not pushed in	10 kΩ or higher

If the value is not as specified, replace the NSC off switch.