Yaw Rate And Acceleration Sensor: Removal: Removal

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Refer to INITIALIZATION .
REMOVE CONSOLE BOX
HINT:

Refer to the instructions for Removal of the console box. Refer to REMOVAL .
REMOVE NO. 2 CONSOLE BOX DUCT . Refer to REMOVAL - Step 45
REMOVE YAW RATE AND ACCELERATION SENSOR
1. Separate the 2 wire harness clamps.
  
  Fig 1: Identifying Yaw Rate And Acceleration Sensor Clamps And Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the 2 bolts and yaw rate and acceleration sensor.
3. Disconnect the yaw rate and acceleration sensor connector.
  
  Fig 2: Identifying Yaw Rate And Acceleration Sensor
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  NOTE:
  Do not remove the sensor from the bracket.