Customize Parameters

CUSTOMIZE PARAMETERS (Using Techstream)

NOTE:

When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.

Connect the Techstream to the DLC3.
Turn the engine switch on (IG).
Turn the intuitive parking assist system on.
Turn the Techstream on.
Enter the following menus: Utility / Customize Setting.

Select the setting by referring to the table below.

WARNING

Tester Display	Default	Contents	Setting
Fr & Rr Buzzer Volume	M2	Function to change volume of buzzer / L, M1, M2, M3 or H	L: Low volume M1: Medium low volume M2: Medium volume M3: Medium high volume H: High volume
Keep Sense Status Buzzer	ON	Function to make buzzer sound when distance between vehicle and obstacle does not change for more than 3 seconds	ON / OFF
Rear Buzzer Onset Range	Wide	Function to set rear buzzer activation range / Narrow or Wide	Narrow: 600 mm(23.62 in.) Wide: 1500 mm (59.06 in.)

SENSOR

Tester Display	Default	Contents	Setting
Sensor Condition N Range	OFF	Make the sensors available when the shift lever is in N / ON or OFF	ON: Available OFF: Not available
Non P/R Range Sensor	F	Function to set available sensors when shift position is not in P or R / F, Rcrn2 or F	F, Rcrn2: Corner sensors are available F: front sensors are available

CUSTOMIZE PARAMETERS (On Display and Navigation Module Display)

NOTE:

When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.

Turn the engine switch on (IG).
Turn the intuitive parking assist system on.
Select the following menus: Setup / Vehicle / LEXUS Park Assist.

Select the setting by referring to the table below.

Display	Default	Content	Setting
Alert volume	3	Change the buzzer volume setting.	1, 2, 3, 4 or 5 1: Low volume 2: Medium low volume 3: Medium volume 4: Medium high volume 5: High volume
Display	On	The display mode setting (when the intuitive parking assist system is normal).	On or Off
Distance	Wide	Set the buzzer activation range for the rear center sensors.	Narrow or Wide Narrow: 600 mm (23.62 in.) Wide: 1500 mm (59.06 in.)