FixVault
Home › Lexus › 2011 › LS 460 AWD › Repair and Diagnosis › Restraints › Air Bag, SRS › Pre-Collision System (Service Information) › Driver Monitor Ecu › Installation › Installation

Driver Monitor Ecu: Installation: Installation

  1. INSTALL DRIVER MONITOR ECU 
    Fig 1: Locating Driver Monitor ECU Connectors And Nuts
    GTY130068Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Install the ECU with the 2 nuts.
    2. Connect the connectors.
  2. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY  . Refer to INSTALLATION - Step 1
  3. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY  . Refer to INSTALLATION - Step 25
  4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY  . Refer to INSTALLATION - Step 26
  5. INSTALL NO. 1 INSTRUMENT CLUSTER MOULDING  . Refer to INSTALLATION - Step 27
  6. INSTALL INSTRUMENT SIDE PANEL LH  . Refer to INSTALLATION - Step 28 .
  7. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY  . Refer to INSTALLATION - Step 30
  8. INSTALL INSTRUMENT PANEL FINISH PANEL END LH  . Refer to INSTALLATION - Step 8 .
  9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Refer to INITIALIZATION .

  10. INSTALL COWL TOP VENTILATOR LOUVER RH  . Refer to INSTALLATION - Step 11 .
  11. CHECK SRS WARNING LIGHT 
    1. Check the SRS warning light. Refer to DIAGNOSIS SYSTEM .
About FixVault