FixVault
Home › Lexus › 2012 › CT 200h Base › Repair and Diagnosis › Engine Performance › System › Engine Control System (2ZR-FXE) (Service Information) › Knock Sensor › Removal › Removal

Knock Sensor: Removal: Removal

  1. REMOVE INTAKE MANIFOLD 

    Refer to REMOVAL - Step 5

  2. REMOVE KNOCK SENSOR 
    1. Disconnect the knock sensor connector.
    2. Remove the bolt and knock sensor.
      Fig 1: Identifying Knock Sensor, Connector & Bolt
      GTY227208Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault