FixVault
Home › Lexus › 2012 › HS 250h › Repair and Diagnosis › Body & Frame › Windows › Power Window Control System (Diagnostics - Introduction) › Power Window Control System › DTC Check/Clear › DTC Check/Clear

DTC Check/Clear

  1. CHECK DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical/(desired system)/Trouble Codes.
    5. Check the details of the DTC(s). Refer to DIAGNOSTIC TROUBLE CODE TABLE .
  2. CLEAR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical/(desired system)/Trouble Codes.
    5. Clear the DTCs.
About FixVault