FixVault
Home › Lexus › 2012 › HS 250h › Repair and Diagnosis › Engine Performance › Testing & Diagnosis › Engine Control System (Service Information) › Knock Sensor › Removal › Removal

Knock Sensor: Removal: Removal

  1. REMOVE INTAKE MANIFOLD 
    1. Remove the intake manifold. Refer to REMOVAL .
  2. REMOVE KNOCK SENSOR 
    1. Disconnect the knock sensor connector.
      Fig 1: Identifying Knock Sensor With Nut
      GTY188634Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the nut and knock sensor.
About FixVault