FixVault
Home › Lexus › 2012 › IS 250 Base, AWD › Repair and Diagnosis › Engine Performance › Fuel Delivery › Fuel System (Service Information) › Fuel Sender Gauge Assembly › Installation › Installation

Fuel Sender Gauge Assembly: Installation: Installation

  1. INSTALL FUEL SENDER GAUGE ASSEMBLY (for RH Side)  See step  19
  2. INSTALL FUEL SENDER GAUGE ASSEMBLY (for LH Side)  See step  7
  3. INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY  See step  8
  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  5. INSPECT FOR FUEL LEAK  . Refer to ON-VEHICLE INSPECTION - Step 1
  6. INSTALL REAR FLOOR SERVICE HOLE COVER  See step  25
  7. INSTALL NO. 2 REAR FLOOR SERVICE HOLE COVER  See step  11
  8. INSTALL REAR SEAT CUSHION ASSEMBLY  . Refer to INSTALLATION - Step 4
About FixVault