FixVault
Home › Lexus › 2012 › IS 250 Base, RWD, Automatic › Repair and Diagnosis › Engine Performance › Tune-Up › Ignition System (Service Information) › Ignition Coil And Spark Plug › Installation › Installation

Ignition Coil And Spark Plug: Installation: Installation

  1. INSTALL SPARK PLUG 
    1. Install the 6 spark plugs.

      Torque: 25 N*m (254 kgf*cm, 18 ft.*lbf) 

  2. INSTALL IGNITION COIL ASSEMBLY 
    1. Install the 6 ignition coils with the 6 bolts.
      Fig 1: Identifying Bolts & Ignition Coil Assemblies
      GTY146014Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf) 

    2. Connect the 6 ignition coil connectors.
  3. INSTALL INTAKE AIR SURGE TANK ASSEMBLY  . Refer to INSTALLATION - Step 13
  4. INSTALL AIR CLEANER CAP WITH AIR CLEANER HOSE  . Refer to INSTALLATION - Step 2
  5. INSTALL NO. 2 VENTILATION HOSE 
    1. Connect the ventilation hose to the cylinder head cover with the clamp.
      Fig 2: Locating Ventilation Hose To Cylinder Head Cover
      GTY122258Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. INSTALL ENGINE ROOM SIDE COVER LH  . Refer to INSTALLATION - Step 116
  7. INSTALL ENGINE ROOM SIDE COVER RH  . Refer to INSTALLATION - Step 117
  8. INSTALL COOL AIR INTAKE DUCT SEAL  . Refer to INSTALLATION - Step 118
  9. INSTALL V-BANK COVER SUB-ASSEMBLY  . Refer to INSTALLATION - Step 115
  10. CONNECT BATTERY NEGATIVE TERMINAL  . Refer to INSTALLATION - Step 93
About FixVault