Rear Speed Sensor: Installation: Installation

HINT: 

If the sensor rotor needs to be replaced, replace it together with the rear axle hub and bearing assembly.

1. INSTALL REAR SPEED SENSOR 
   1. Install the rear speed sensor with the bolt.
      Fig 1: Identifying Rear Speed Sensor

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Torque: 8.5 N*m (87 kgf*cm, 75 in.*lbf) 

      NOTE:

      Prevent foreign matter from attaching to the sensor tip.

2. CONNECT REAR SPEED SENSOR WIRE 
   1. Connect the rear speed sensor wire.
      Fig 2: View Of Rear Speed Sensor Wire

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. INSTALL REAR WHEEL 

   Torque: 103 N*m (1050 kgf*cm, 76 ft.*lbf) 

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
5. INSPECT SPEED SENSOR SIGNAL 

   Refer to TEST MODE PROCEDURE