Fuel Pressure Sensor: Installation: Installation

1. Install a new gasket to the fuel pressure sensor.
2. Using SST, install the fuel pressure sensor to the No. 1 delivery pipe.
   Fig 1: View Of Installing Fuel Pressure Sensor

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   • SST: 09922-10010 

   without SST 

   Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf) 

   with SST 

   Torque: 32 N*m (324 kgf*cm, 23 ft.*lbf) 

   HINT: 

   • The torque for use with SST is the torque when SST is used at the position shown in the illustration.
   • The "with SST" torque value is effective when using a torque wrench with a fulcrum length of 300 mm (11.81 in.). Refer to PRECAUTION .
3. Connect the connector with the clamp.
   Fig 2: Location of Connector With Clamp

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

HINT: 

Refer to INSTALLATION .