FixVault
Home › Lexus › 2012 › IS F › Repair and Diagnosis (Single Page) › Electrical › Starter › Starting System (Service Information) › Engine Switch › Removal › Removal

Engine Switch: Removal: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Refer to INITIALIZATION .

  2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY  . Refer to REMOVAL - Step 4
  3. REMOVE UPPER NO. 1 CONSOLE PANEL GARNISH  . Refer to REMOVAL - Step 5
  4. REMOVE UPPER NO. 2 CONSOLE PANEL GARNISH  . Refer to REMOVAL - Step 6
  5. REMOVE CONSOLE PANEL SUB-ASSEMBLY  . Refer to REMOVAL - Step 7
  6. REMOVE INSTRUMENT PANEL BOX ASSEMBLY (w/o Ashtray)  . Refer to REMOVAL - Step 8
  7. REMOVE FRONT ASH RECEPTACLE BOX SUB-ASSEMBLY (w/ Ashtray)  . Refer to REMOVAL - Step 9
  8. REMOVE REAR ASH RECEPTACLE ASSEMBLY (w/ Ashtray)  . Refer to REMOVAL - Step 8
  9. REMOVE CONSOLE BOX REGISTER ASSEMBLY (w/o Ashtray)  . Refer to REMOVAL - Step 9
  10. REMOVE CONSOLE BOX REGISTER ASSEMBLY (w/ Ashtray)  . Refer to REMOVAL - Step 10
  11. REMOVE CONSOLE BOX  . Refer to REMOVAL - Step 11
  12. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY  . Refer to REMOVAL - Step 14
  13. REMOVE CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL  . Refer to REMOVAL - Step 15
  14. REMOVE DISPLAY AND NAVIGATION MODULE DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Multi-display)  . Refer to REMOVAL - Step 15
  15. REMOVE INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Multi-display)  . Refer to REMOVAL - Step 11
  16. REMOVE ENGINE SWITCH 
    1. Disconnect the switch connector.
      Fig 1: Identifying Claws And Switch
      GTY136247Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Detach the 2 claws and remove the switch.
About FixVault