FixVault
Home › Lexus › 2012 › LS 460 AWD › Repair and Diagnosis (Single Page) › Body & Frame › Windows › Windshield/WINDOWGLASS (Service Information) › Front Passenger Side Power Window Switch › Inspection › Inspection

Front Passenger Side Power Window Switch: Inspection: Inspection

  1. INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY 
    1. Measure the resistance according to the value(s) in the table below.
      Fig 1: Identifying Power Window Regulator Switch Connector Terminals
      GTY117178Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard resistance

      Tester Connection Switch Condition Specified Condition
      2 (UP) - 5 (GND) Manual UP operation Below 1 Ω
      10 (DOWN) - 5 (GND) Manual DOWN operation Below 1 Ω
      4 (AUTO) - 5 (GND) AUTO UP/DOWN operation Below 1 Ω
      • If the result is not as specified, replace the power window regulator switch assembly.
    2. Check that the LED illuminates.
    3. Apply battery voltage to the power window regulator switch and check that the LED illuminates.

      OK

      Measurement Condition Specified Condition
      Battery positive (+) → 8 (LED)
      Battery negative (-) → 5 (GND)      		 LED illuminates
      • If the result is not as specified, replace the power window regulator switch assembly.
About FixVault