FixVault
Home › Lexus › 2012 › RX 350 AWD › Repair and Diagnosis › Accessories & Equipment › Communication Devices › Lin Communication System (Diagnostics - Introduction) › Lin Communication System › Precaution › Precaution

Lin Communication System: Precaution: Precaution

NOTE:

When disconnecting the cable from the negative (-) battery terminal, initialize the following systems after the cable is reconnected.

System Name See Procedure
Parking Assist Monitor System Refer to INITIALIZATION
Slide Monitor System (w/ Parking Assist Monitor System)
Back Door Closer System
Power Back Door System
  1. PRECAUTIONS WHEN USING TECHSTREAM 
    1. When using the Techstream to troubleshoot with the engine switch off:

      Connect the Techstream to the DLC3, and turn the courtesy light switch on and off at 1.5-second intervals until communication between the Techstream and vehicle begins.

    2. After all DTCs are cleared, check if the trouble occurs again 6 seconds after the engine switch is turned on (IG).
  2. PRECAUTIONS WHEN WORKING ON STEERING LOCK SYSTEM 
    1. After replacing the steering lock ECU (steering lock actuator assembly), perform the key ID code registration.
    2. After replacing the steering lock ECU (steering lock actuator assembly), confirm the lock/unlock operation of the steering lock.
      OPERATION CONFIRMATION

      Steering Lock Condition Operation Condition
      Lock With the engine switch off, open and close any door.
      Unlock Turn the engine switch from off to on (ACC) or on (IG).
About FixVault