Accessory Meter: Installation: Installation

INSTALL ACCESSORY METER ASSEMBLY
1. Connect each connector.
2. Engage the 2 clips.
  
  Fig 1: Remove The 3 Screws & Disengage The 2 Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Install the accessory meter assembly with the 3 screws.
INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL . Refer to INSTALLATION - Step 30
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Refer to INITIALIZATION .